Detailed Product Description

 1.      Product characteristics

Two component polyamine cured solventfree high build epoxy coating.

2.Product use

UNEPOX HB  consist of 100% solids epoxy and aggregates producing a fluid, self-leveling mixture that can be spread with a V-notched squeegee or trowel.  

2.1.Uses areas :

Activity Centers ,Aircraft Hangars ,Airports - Baggage/Service ,Animal Areas - Housing Cage Washing ,Beverage - Processing ,Packaging/Warehousing ,Bottling ,Cafeterias Chemical Processing ,Clean Rooms ,Coolers ,Correctional Facilities ,Corridors, Decks/Ramps ,Dairies ,Distilleries Packaging, Food Processing ,Food Preparation and Service ,Garages - Service ,Laboratories ,Laundries ,Locker Rooms ,Machine Shops , Manufacturing ,Mechanical Equipment Rooms ,Pharmaceutical Plants ,Pulp and Paper Processing Facilities ,Showers ,Utilities ,Warehouses ,Waste Water Treatment Facilities

3. Product properties

-good chemical resistance against a wide range of chemicals.

-short curing periods.

-good low temperature cure.

-good water and corrosion resistance

-tank coating for crude oil and petrolium products

-one coat protection for steel structures,ships and storage tanks with excellent corrosion resistance

-suitable as a topcoat in concrete systems.

-eliminates explosion risk

4. Color Selection

UNEPOX HB is available in a variety of RAL Colour Chart.

Custom colors are available subject to laboratory approvals, minimum quantities, lead time for production, and increased cost.BOYTEM TECH SERVICE DEPARTMENT are ready to assist.

5.      Technical data

BASIC DATA(for mixed product at 20 C)

Mass density            :approx.1,58 g/cm?

Solids content          :approx.99,5 % by volume

Cure time                : 24 hours  

Maximum time

between coats         : 48 hours  

Light traffic use after : 24 hours   

Full traffic use after : 48 hours  

5.1. Physical Data

Resistance to  chemical spillage : 7 days 

Compressive strength : 70 N/mm2

Flexural strength : 40 N/mm2

Tensile strength : 20 N/mm2

Water absorption : 0.06% (ASTM C 413:1996)

Shore D Hardness : 85  (ASTM D 2240 : 1996)

5.2. Theoretical spreading rate

4 m?/kg(Depending on surface permeability and porosity)