Detailed Product Description

AQ PRIMER is a new generation product designed for application on green concrete as a primer or primersealer.Unlike traditional sealers, a sealer based on this product does not need to be removed before further treatment.

AQ PRIMER also meetthe ASTM 309 requirement (water loss of 0.55 kg/m2 maximum) for use as a concrete curing compound.AQ PRIMER is a combination with water based curing agent and  epoxy resin It may be thinned by tap water before using.

Excellent adhesion to green concrete

Fast drying time

Quick return to service

Zero-VOC

Mixes easily with water

Can be brushed, rolled or spray applied

Low formulation viscosity allows excellent penetration of concrete substrate

Good through-cure

Meets ASTM 309 requirement for use as a concrete curing compound

Easy to clean up

Primer/sealer for green concrete

Primer for new or existing concrete

Concrete curing compound

5. Technical data

BASIC DATA(for mixed product at 20 C)

Mass density                    :approx.1,10 g/cm³

Solids content          :approx.41 % by volume

Touch after dry                 :1 hour

Hard dry                          :5 hours

Overcoating interval           :Min.24 hours

Full cure after                            :7 days

Typical Performance

(3-mil film over CRS) Direct Impact Resistance (in/lb) After 3-month cure      160

Reverse Impact Resistance After 3-month cure                                              90