Detailed Product Description

1.  Product characteristics

Two component, water based adduct cured glossy epoxy topcoat

2.        Product use

Unepox Enamel WB is general purpose water based epoxy topcoat in protective systems for steel and concrete structures exposed to atmospheric land or marine conditions.

2.1.Uses areas :

Pipe lines,water purification plants, tanks exterior surfaces, food industries, refineries, petrochemical plants.

3. Product properties

-good adhesion to steel, galvanized steel and aluminium

- Applicable to Damp surfaces

-cures at temperatures down to +10 C

-long pot life

-good water and corrosion resistance

-good resistance against  splash of mild chemicals

-easy application, both by airless spray and brush

-good hygienic surface properties,

4. Colors:

Unepox Enamel WB is available in a variety of RAL Colour Chart.

Custom colors are available subject to laboratory approvals, minimum quantities, lead time for production, and increased cost.BOYTEM TECH SERVICE DEPARTMENT are ready to assist.

5.        Technical data

BASIC DATA(for mixed product at 20C)

Mass density               :approx.1,48 gr/cm?

Solids content             :approx.45 % by volume

Touch after dry                       :2-4 hour

Overcoating interval    :Min.24 hours, Max.48 hours

Pot Life                   :3 hours at 20C

5.1.Curing Time:

Cures @ temperatures down to +10C.  Full cure after: 7 days

5.2. Theoretical spreading rate

9 m?/kg at 40 micron dry film thickness(Depending on surface permeability and porosity)