Detailed Product Description

Three-component & water-washable mortar system and solvent free .

UNEPOX 1418E is is exceptionally high strength, chemical & impact resistance is required and unique makeup produces a mortar with greater bond and compressive strengths and improved chemical and stain resistance over conventional cement or emulsion-based setting systems

Concrete, mortar beds, masonry, Portland cement plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, sheet vinyl flooring, VCT, plastic laminates, cutback adhesive, bare carbon steel

-For floor and wall installations. For best results when used on vertical applications

-For interior use

-For exterior installations with surface temperatures between 16C and 32C

-Industrial  commercial & institutional applications with extremely high mortar strength requirements

-High traffic areas such as airports and shopping malls

-applications requiring high acid and chemical resistance such as dairies,breweries,bottling plants,bakeries,meat packing plants, pharmaceutical plants and animal hospitals

3. Product Properties

-Exceptional bond and compressive strengths

-Highly chemical resistant

-High impact resistance

-Water washable

-Extended pot life

-Deep, penetrating and tenacious bonding of cracks in structural concrete.

4. Color Selection

Dirty White

5.        Technical data

BASIC DATA(for mixed product at 20 C)

Mass density           :2 gr/cm³±0,02

Solids content :approx.100 % by weight

Pot life                            :20C at 30 minutes , 30C at 25 minutes

Touch after dry       :2-4 hours

Overcoating interval  :Min.24 hours, Max.48 hours

Full cure after                   :7 days

Electrical Conductivity :10¹³ Ohm

Thermal Dilation       :20-22.10^-6  

Compression Resistance      :72 N/mm²

Thermal Conductivity Coefficient :0.3 kcal/mh°C

5.1. Theoretical spreading rate

2kg/lt (Depending on surface permeability and porosity)